
Gorgeous flamed maple top

The LP Traditional PRO has a solid Mahogany back
with a carved top and a solid Mahogany neck

Both volume controls feature push/pull
potentiometers allowing you to coil-tap each pickup for that quacky single-coil sound.

In the neck position is the Alnico Classic
PRO™ humbucker with Alnico-II warm, thick vintage tone and open zebra
coils. It's uniquely paired with Epi's new ProBucker-3 humbucker. An
inspired by version of Gibson's BurstBucker-3, it features unevenly wound
coils and Alnico-II magnets that replicate that "Patent Applied for" airy
tone.

Above: Epiphone Strap Locks (unused) that came
with the guitar. Just fit them to the ends of your strap, tighten up the
nuts, and you are ready to go. They clip very securely onto the existing Epiphone strap pins.



Quality Grover™ machine heads


The Epiphone guitar came originally without a
case, and so I purchased a brand new Spider Vintage Tweed Hard Guitar
Flight Case. This new case is also included in the sale.


This guitar is in A1 mint condition! No
modifications have been made. The setup and action is fine!
Epiphone Limited Edition 2014 Les
Paul Traditional PRO (Desertburst, Brown Back)
The new LP Traditional PRO uses Epiphone's new
4-wire, nickel/silver base humbuckers with newly tooled, U.S.A. style
bobbins. In the neck position is the Alnico Classic PRO™ humbucker
with Alnico-II warm, thick vintage tone and open zebra coils. It's
uniquely paired with Epi's new ProBucker-3 humbucker. An inspired by
version of Gibson's BurstBucker-3, it features unevenly wound coils and
Alnico-II magnets that replicate that "Patent Applied for" airy
tone. You'll love the way they sound! To top it all off, both
volume controls feature push/pull potentiometers allowing you to coil-tap
each pickup for that quacky single-coil sound. Combined with the 3-way
toggle, you get a wide range of unique sounds from one great guitar.
The LP Traditional PRO has a solid Mahogany back
with a carved top and a solid Mahogany neck that's hand-fitted and glued
into the body for excellent neck-to-body contact and acting almost like
one continuous piece of wood. The neck features a SlimTaper™ 'D' profile
with a smooth and fast "worn" type finish on the back of the neck and
body. Other features included quality Grover™ machine heads, the
traditional cream colored pickguard, LockTone™ Tune-O-Matic/stopbar and Epiphone's own StrapLocks.
Body: Mahogany Neck:
Mahogany Neck Shape: 1960's SlimTaper™; 'D'
profile Neck Joint: Glued-In
Truss Rod: Adjustable Scale Length:
24.75" Fingerboard: Rosewood with mother-of-pearl
Trapezoid inlays Neck Pickup: Epiphone Alnico
Classic™ Humbucker (4-wire) Bridge Pickup: Epiphone
ProBucker-3™ Humbucker (4-wire)
Controls: 3-way Pickup
Selector Neck Pickup Volume
with push/pull coil-tapping
Bridge Pickup Volume with push/pull
coil-tapping Neck Pickup
Tone Bridge Pickup
Tone Binding: Fingerboard & Body- 1 ply
(cream) Fingerboard Radius:
14" Frets: 22; Medium-Jumbo
Bridge: LockTone™ Tune-o-matic/Stopbar Nut Width:
1-11/16" Hardware: Nickel
Machine Heads: Grover™; 14:1 ratio Finish: Top =
Gloss; Back = Worn
£290 including case
(Cost new was £349 for the guitar and £44.99 for
the case - Less than 1 month ago!)
I would much prefer you to come and collect this guitar, (Gloucestershire, 20
minutes off the M5 at Gloucester) but I can ship it at
extra cost if you wish. Shipping would be by carrier, fully tracked and insured.
|